-MAIN
-NAGRA2 FAQ
-NEWBIES
-GUIDES
-N1 FILES
-FORUM
-CHAT
-SPONSORS

Guide Description
Wintoad Guide for Dish Wintoad guide that explains onhow to setup Wintoad for Dish /font>
Wintoad Guide for BEV WintoaD guide that explains on how to Setup Wintoad for Bev
Rom 3 Open for BEV Guide one how to open a BEV CAM that is below Rev 380
BEV Rom 10 Guide Rom 10 Guide - Instructions on how to program a Rom10 for BEV. You will need Adobe Acrobat Viewer to view this guide, you can download Adobe by clicking here.
BEV Rom 3 Guide Rom 3 Guide - Instructions on how to program a Rom3 for BEV. You will need Adobe Acrobat Viewer to view this guide, you can download Adobe by clicking here.
Atmega Guide Guide one how to program your Atmega wafer.
AVR Guide Guide one how to program either an auto roll or non auto roll AVR board with Jeepers.
Winvu Guide Information on how to set up your computer to emulate with Winvu.
JavaEMU Guide Information on how to set up your computer to emulate with JavaEMU. Just updated!
2700 Fix Please note that it is currently not required to change your IRD's firmware. Turnip 4.3 works fine with newer versions of firmware. If you still want to change your firmware, you can follow this guide and do it the manual way, or you can download the auto patching program for the 2700, 3700 and 4700 IRDs from the files section . This is a guide for those of you who want married sub autoroll back and have a 2700 IRD. Will not be interfered by the 104 nag: "There is a serious problem..."
JTAG Guide Information on how to extract your IRD's boxkey so you can run Winvu and other camless solutions.